ACER MONITOR AL2016W DRIVER

Remove the screws as shown on both the power supply and the back light inverter board. RKA on Wed, 17th Jun Next unplug the back light cables and remove the the 2 screws from each end of the display as shown. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. XX devices Recent Comments fatcountry.

Uploader: Tojashicage
Date Added: 15 October 2013
File Size: 20.13 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 14353
Price: Free* [*Free Regsitration Required]

You will need to unplug the power supply cable from the CPU board. To print the manual completely, please, download it. The capacitors that need to be replaced are as follows: Tom on Thu, 31st May 1: Adjustable range from the value of 0 to Page of 12 Go. Now you will need to use the flat blade screwdriver again to release the latches round the monitpr. I have the same monitor and the board is different. Gently lift the aecr shield up so you can unplug the signal cable from the LCD panel.

Acer Monitor 20in Display TFT LCD Display Aspe ALW

To remove the back you will first need to remove the 3 screws as shown below. XX devices Recent Comments fatcountry.

Last Drivers  PLACA DE RETEA DRIVERS DOWNLOAD

Thanks for your help. Recent Posts Seagate to exit 2. Place a clean dry cloth under the monitor to protect it further.

Operating Your Monitor First, switch the power on to the monitor, then ,onitor the power on to the computer. Also, there is no separate? Soldering iron and solder, De-solder wick or de-soldering iron, Phillips screwdriver, small flat blade straight screwdriver. Copyright Corporate Computer.

Acer Monitor 20in Display TFT LCD 169 Display Aspe AL2016W

After replacing the capacitors re-assemble the monitor and you should be back as good as new. If you monitor is having power or display issues then this should get you back going again.

James McLellan on Sun, 21st Apr I was able to open the monitor but the board and capacitors of the ALWB seem to be different. Fcc Statement Warning We at Acer are very conscious of the environmental forces that impose on our business and strive to identify and provide the best working products to reduce the environmental impact of our products.

The latches are shown below. Add to my manuals Add. There are release latches on both ends of the connection that you will need to press in to release.

Last Drivers  DELL E1911 DRIVERS FOR WINDOWS MAC

Don’t have an account? To start the dis-assembly you will need to remove the back of the monitor. Enter text from picture: Remove the screws as shown on both the power supply and the back light inverter board. On the back, first remove the stand cover. Source Change Analog and Digital source change. With the stand removed you will need to pop the back off by inserting the small flat blade screwdriver between the 2 halves and pop the latches apart around the 4 sides and remove the front of the case.

In the following repair guide we will be rebuilding this power supply board. Comments to this Manuals Your Name.